Reflective iron-on patches 9x12 cm
Code: 390538/1 390538/7 390538/9 Choose variant
Product detailed description
Instructions for use: These iron-on transfers are suitable for cotton fabrics and cotton-polyester blends. Cut the design out of the sheet. Use a dry iron (turn off the steam function). Place the design on the fabric with the clear film facing up, cover with baking paper, and iron for 15 seconds at setting 2–3 (follow the recommended ironing temperature for the specific fabric). Once cooled to room temperature, peel off the clear backing film. Cover the design (now without the backing film) with baking paper and iron again for 5 seconds. The result is an evenly applied design that retains the fabric's texture.
Note: Do not wash the fabric until at least 48 hours after application. The item is washable at 40°C; ironing over the design is permitted.
- Width: approx. 2.5 cm; 4 cm
- Height: approx. 2.8 cm; 4 cm
- Set dimensions: 9 x 12 cm
- Wash at max. 40°C, gentle cycle
- Do not bleach
- Tumble dry at low temperature (60°C)
- Iron at a maximum soleplate temperature of 110°C
- Steam ironing may cause irreversible damage
- Do not dry clean
Additional parameters
| Category: | Haberdashery |
|---|---|
| Warranty: | 24 months |
| Composition: | plastic |
Discussion
Be the first who will post an article to this item!