Prym creative print fabric

Using the creative fabric:

1. Prepare an image or photo on your computer and prepare it for printing.
2. Set the print options to the highest quality and the paper type to "Plain paper".
3. First, print the image or photo on plain paper and check the correct ink coverage, whether the image is blurry, size and location.
4. Cut off excess fibers on the creative fabric that could get stuck in the printer (never pull the fibers, this could damage the structure of the creative fabric).
5. Insert the prepared creative fabric into the paper tray.
6. Start printing and after printing, let the image dry for about 2 minutes.
7. Iron the printed creative fabric from the paper side with an iron and slowly peel it off from the paper backing.
8. Before sewing, remove excess ink from the printed fabric by immersing it under a steady stream of cold water. Then spread the fabric out and let it dry naturally. The fabrics must not be wrung out by twisting.
9. Once the fabric is dry, we can sew it onto the chosen fabric and we are done.

Use high-quality cotton fabrics. Print only with a suitable inkjet printer.