Fixing ironing grid

Standard fusing parameters are a temperature of 100 ° C for 15 seconds. The manufacturer recommends a pressure of 2 N / cm2 for a platen press, 5 N / cm2 for a continuous press. However, there are differences in top materials and fusing presses that significantly affect the actual fusing. We therefore always recommend carrying out tests. The warranty is limited exclusively to the replacement of the fusing grid itself. All other replacements and compensation are excluded. 50 m package.

Instructions for use:

Place the fusing tape with the grid on the edge of the reverse side of the hem.

Iron through the paper with an iron at 100 degrees Celsius for 15 seconds.

Now remove the paper tape, fold the hem and iron again. We recommend ironing through another fabric - e.g. a handkerchief. This will avoid shiny marks that an iron sometimes causes on delicate fabrics.