Don't worry about a burnt-on ironing surface and try the DECAPFER ironing surface cleaning stick. DECAPFER ironing surface burn-on remover. The DECAPFER cleaning stick is used to remove burnt-on from the ironing surface.
It is suitable for removing melted fibers, iron-on transfers, etc. To maintain the long-lasting glide of the ironing surface, it is necessary to remove the burnt-on as soon as possible. Suitable for all types of ironing surfaces, both domestic and industrial.
Instructions for use of the ironing surface cleaning stick:
1. Set the iron temperature between level 1 and 2 (dots) and let it heat up.
2. Unplug the iron from the mains and place it with the heel on an old towel pad.
3. Go over the dirty area on the ironing surface with the stick (1-2 times).
4. Wipe the melted stick from the surface using a cotton cloth (old towel).
Tips and tricks for using DECAPFER burn-in remover
Smoke may appear during use, which is normal.
If you cannot get rid of the stains from the soleplate, repeat the procedure several times.
Before ironing for the first time after cleaning, test the cleanliness of the surface on an old towel.
Do not turn the iron with the soleplate facing upwards so that the cleaner does not flow deep into the steam holes.
Clean the steam holes by repeatedly pressing the steam button (steam shot) over the towel.
Wash the soiled cleaning cloths separately from regular clothing.
Clean in a well-ventilated room.
